Receive free replacement for lost packages, priority handling and a $10 gift card
$0
✔ Revives Gray, Rough, Faded Outdoor Furniture — Feeds the Wood, Then Seals It
✔ No Sanding, No Stripping, No Pressure Washer — Soap & Water Prep Only
✔ Won't Go Sticky or Attract Pollen Like Teak Oil — Zero Solvents, Nothing Evaporates
✔ Also Fixes Scratches, Water Rings & Heat Marks on Indoor Wood
✔ 30-Day Money-Back Guarantee — Keep the Jar
Couldn't load pickup availability
We offer a risk-free 30-day money-back guarantee that begins only when you receive the product!
If you're not happy you can return your order and we'll give you a full refund*.
*Refunds are processed in accordance with our return policy
We offer fast and reliable shipping on all orders.
You can expect to receive it within 5-12 business days based on your location.
Please contact our customer service team for assistance if you have any questions or concerns about your shipment.
1x Luxgrove™ Wood & Leather Repair Salve
Every piece of furniture is different — age, prior coatings, cleaning agents, and finish types can all affect results.
Always test on a small, hidden area first before full application and allow it to dry completely.
Luxgrove products are designed for absorbent leather and finished wood.
Not suitable for suede, nubuck, untreated, or synthetic materials.
By purchasing, you acknowledge that Luxgrove is not liable for damage resulting from misuse, failure to test, or application on incompatible surfaces.
Gray, rough, tired-looking outdoor furniture isn't old.
It's thirsty.
Sun and rain pull the natural oils out of the wood's surface in as little as two summers.
Without that oil, the surface goes brittle — that's the graying, the dry drag under your hand, the fuzz, the sleeve-snag.
Luxgrove™ is chapstick for your wood.
The plant oils absorb into the dried-out surface and feed it.
Then the beeswax seals them in — so the sun can't take them back out.
No sanding. No stripping. No pressure washer.
Just wood that feels like wood again — on teak, acacia, eucalyptus, cedar, and every hardwood in the yard.
Teak oil feeds the wood — then sits there open to the sky, evaporating.
Beautiful for three weeks, sticky in the heat, gone by the end of the season.
(Turn the bottle around: most of it is solvent, designed to evaporate.)
Sealers do the opposite — they coat a surface that's already starving underneath, which is why they wear through in patches within a season.
Luxgrove™ does both halves, in the right order.
The oil goes in and restores the surface — you can watch the dry, chalky tone deepen and even out.
Then the wax seals the door behind it, so the oil doesn't evaporate in the sun or wash out in the rain.
Feed it, then seal it.
That's why it holds for the season instead of three weeks.
OUTDOORS:
✔ Gray, faded patio sets — teak, acacia, eucalyptus, shorea, cedar
✔ Rough, fuzzy surfaces that snag sleeves
✔ Adirondack chairs, garden benches, porch swings
✔ Dry, sun-bleached wood that's lost its color
✔ Fall protection before the cover goes on
INDOORS:
✔ Scratches & scuffs — kids, pets, keys, plates
✔ Water rings & heat marks
✔ Dry, faded, dull tables and cabinets
✔ Cloudy spray-polish buildup
Patio sets, tables, floors, dressers, benches, banisters. Teak, acacia, oak, walnut, cherry, maple, pine, mahogany. One product.
The oils are the curing kind — that's the whole trick.
Kitchen oils (the ones DIY recipes call for) spoil in heat.
Luxgrove™ uses cold-pressed hemp seed oil, a drying oil that sets in the wood instead of sitting on top, and jojoba — technically a liquid wax that essentially can't go rancid.
Shea butter carries them in.
Vitamin E protects the oils from oxidizing — the same failure that grayed your furniture.
Real beeswax seals it all in.
No solvents. No petroleum. No dye. No fumes.
(The hardware-store "beeswax conditioners"? Check the label — the beeswax is usually blended with mineral oil. That's petroleum. It sits, evaporates, and asks you back next month.)
Safe for your family, indoors and out on the deck where the kids and the dog spend all summer.
A Morning, Not a Weekend
No sanding. No refinishing. No professional needed. Four simple steps:
1. **Clean** — Outdoors: wash with soap and water, let it dry fully. Indoors: wipe down with a dry cloth. (We know there are crumbs.)
2. **Apply** — Work a small amount in with a cloth, along the grain. A little goes a long way — watch the dry, chalky tone deepen and even out as the wood takes the oil.
3. **Wait** — Let it sit a few minutes while the oil absorbs into the surface.
4. **Buff** — Wipe with a clean cloth as the wax sets. Dry to the touch, nothing sticky, nothing for pollen to grab. Try not to do every piece of furniture you own. (You'll want to.)
Do it once a season outdoors — ideally in fall, before the cover goes on, so the wood goes into winter fed and sealed.
Teak oil. Sealers. The pressure washer. The walnut trick. Markers. Old English.
None of them lasted — because every one of them did half the job.
This does both halves.
30-day money-back guarantee, starting when it arrives — and you keep the jar.
*Refunds processed in accordance with our return policy.
If the graying is recent — a summer or two — yes: the salve feeds the dried-out surface, the chalky tone deepens and evens, and the smooth feel comes back. Wood that's been silvering for years carries a layer of oxidized surface cells; give it a proper soap-and-water clean first, and expect the texture to come back before the original color does. Deeply weathered, cracked, or splintering wood needs professional restoration — we'd rather tell you now than refund you later.
You've read right — about teak oil. What's sold as "teak oil" is mostly thinned linseed and solvent: the solvent evaporates in hours, the thin oil follows in weeks, and while it sits open on the surface it goes sticky and collects dirt. Luxgrove™ is different in the one way that matters: the beeswax seals the oil in, so nothing sits open and nothing evaporates. Oil that's sealed in behaves nothing like oil that isn't.
Once a season. Sun and rain work harder than your living room does. The best single application of the year is fall — before the cover goes on — so the wood goes into winter fed and sealed. (Indoors: every 2–3 months for high-use pieces.)
No — and this is exactly why. Teak oil sits open on the surface, so it stays tacky and catches everything. Luxgrove's wax sets dry to the touch the moment you stop buffing. Nothing open, nothing sticky, nothing for pollen to grab.
No — please don't pressure wash. It brings the color back for a week by tearing off a layer of wood along with the oils that were left in it. The entire prep list: soap, water, let it dry.
Teak, acacia, eucalyptus, shorea, cedar — and indoors: oak, walnut, cherry, maple, pine, mahogany. If it's wood and it's gone dry, the mechanism is the same. Always test a small hidden area first.
100%. Cold-pressed hemp seed oil, jojoba, shea butter, vitamin E, and beeswax. No carcinogens, no harsh chemicals, no toxic fumes. Safe for homes with children and pets — including the deck, where they live all summer.
No. It absorbs in and the wax buffs to a smooth, natural finish with no residue — plates and glasses go right on it.
Everything you've tried did half the job. The oils fed and never sealed, so the sun took them back. The sealers coated and never fed, so they wore through in patches. Luxgrove™ feeds first, then seals — both halves, one product, in the right order.
Nope — that's what it's for. One application feeds the dryness, evens the tone, smooths the surface, and seals against the next season. Most customers are shocked one jar replaces the three or four bottles in their garage.
Yes — no dye, no color matching. Scratches are an air problem: air trapped in the groove scatters light. The oil replaces the air, the wax seals it, the scratch disappears. Deep gouges that catch a fingernail will improve but may not fully vanish.
Yes — the oil absorbs into the finish and releases the trapped moisture that causes white rings and cloudy marks. Most customers see results in one application.
Scratches aren't a color problem — they're an air problem. Air trapped in the groove scatters light. The oil replaces the air, light passes through smoothly, scratch disappears. That's why it works on every wood tone without shade matching.
Those add color ON TOP of the air. The air is still in the scratch underneath. First time you clean, the color comes off. Luxgrove's oil goes INTO the scratch and replaces the air. The wax seals it from the top so it stays — even on floors you mop weekly.
Yes — this is what Luxgrove™ does best. The oil penetrates into the wood grain and dissolves trapped moisture that causes white rings and cloudy marks. Most customers see results within a single application. One described it as the marks just "wiped away like magic."
Absolutely. Heat marks, heat rings, and white circles from hot mugs or casserole dishes respond well to Luxgrove™. The oil-plus-wax formula penetrates through the damaged finish to restore the wood beneath.
100%. Luxgrove™ is made with cold-pressed hemp seed oil and natural waxes. No carcinogens, no harsh chemicals, no toxic fumes. It’s safe for homes with children and pets — unlike some leading competitors whose own datasheets list harmful ingredients.
Luxgrove™ works on virtually all wood types including oak, mahogany, walnut, pine, cherry, maple, and teak. Effective on dining tables, coffee tables, dressers, desks, cabinets, banisters, and more. Always test on a small hidden area first.
No. Unlike spray polishes that build up over time (a common complaint with products like Pledge), Luxgrove™ absorbs fully into the wood. Once buffed, it leaves a smooth, natural finish with no residue — safe to set plates and glasses right on.
For most families, one application every 2–3 months keeps furniture looking great. For high-traffic tables wiped daily, reapply quarterly. One application creates a protective barrier against future damage.
Those DIY methods only work on the surface (if they work at all). Luxgrove’s Oil + Wax formula penetrates deep into the wood fiber to restore from within — then seals the surface to protect against future damage. It’s the difference between masking a problem and actually fixing it.
Nope — that's exactly what Luxgrove™ was made for. One application addresses water marks, heat rings, scratches, scuffs, dryness, and fading all at once. The oil penetrates to fix damage while the wax restores sheen and protects. Most customers are shocked that one product handles everything they'd been buying three or four products to try to fix.
Yes. Because Luxgrove™ absorbs into the wood rather than sitting on the surface, regular wiping won't strip it away like it does with spray polishes. For heavy-use tables, we recommend reapplying every 2–3 months to keep the protective barrier strong. Think of it like chapstick — reapply occasionally and your table stays nourished and protected.
